Not able to have a 3rd building in building queue [Archive]

whispydelar

31.07.12, 10:44

When building, normally i have 3 buildings allowed to queue. However, when i begin the building queue i place 2 buildings and they are fine, when i place a third building in the queue, it shows up, briefly, then disappears. No matter how often i try this, it continues to cut back to only the first two buildings in the queue. Please fix this. It was working fine before and this is the first time this has ever done this.

Thanks
whispydelar

newties21

02.08.12, 16:26

Hi,

I have the same problem today after maintenance.

The problem is similar.

Sometimes I have no 3rd queue, as if I only have 2 maximum construction limit.

Sometimes I cannot build anything at all.

If I build something, the construction process, as well as the right-hand-panel queue, would disappear midway through.

I tried re-installing Flash, switching from FireFox to IE, restarting my comp, but nothing worked.

Then I tried fiddling with my network settings.

I did "ipconfig /release" and "ipconfig /renew" on the CMD (MS-DOS CMD) and also restarting the power of my home router.

Then the problem was slightly different, I could construct buildings, but no 3rd queue again, or, now, the problem became that if I schedule 3 constructions at the queue, the second one would get executed but the first and the 3rd one disappear.

In the midst of all this, there was an error message which popped up, I dont remember its exact wordings but it is something like this,

"unable to establish data call to server, please empty browser cache".

Or something similar to that.

Btw, I think maybe the issue is not at the client side, because I can play on the test server without problems.

I can open both the regular server and the test server side-by-side, and this problem only happens on the regular server (Sandycove for me).

Please pass this information to the technical department. Maybe they have some ideas.

Thank you,

newties21