New Trap buff indicator not showing actual placing of the buff/not applying buff

[Dollt28]

Hello all,

so I started using new the new trap buff, but apparently the range indicator isn't working properly

http://i.imgur.com/qqPJtw7.png - all 3 hunters should be buffed according to indicator but http://i.imgur.com/Mfhv2cY.png the left one even thought he was marked as well, did not receive buff

another example http://i.imgur.com/9ISGEj7.png , http://i.imgur.com/cCUXDIp.png

those above should be 100% buffed as well, but these below I kind of understand that they are not buffed, however, buildings are still in range of the buff indicator

http://i.imgur.com/ZRpyNg1.png , http://i.imgur.com/daEilaH.png

http://i.imgur.com/QCihKdZ.png , http://i.imgur.com/opF86yM.png

Is this intended ? Seems like a bug to me

[Durin_d]

Buildings with the blue flag on top of them will be buffed.



http://i.imgur.com/qqPJtw7.png - all 3 hunters should be buffed according to indicator but http://i.imgur.com/Mfhv2cY.png the left one even thought he was marked as well, did not receive buff


On the first picture only 2 hunters have the flag showing so only those will be buffed.



another example http://i.imgur.com/9ISGEj7.png , http://i.imgur.com/cCUXDIp.png

Same here. Only 1 hunter has the flag showing.

[Dollt28]

Ok thx, but why the other buildings don't have blue flag as well ? They are in the green indicator !?

[Durin_d]

No they aren't. The bottom corner (southern) of the building has to be under the green green indicator.

[Dollt28]

But why does it work like that ? http://i.imgur.com/jD1XHgP.jpg , http://i.imgur.com/OlFQ42G.jpg thats a half of the building.....
Btw does the other buffs like that (for cutters etc.) work the same way, so the bottom corner have to be in the green indicator ?

[MOD_Daz]

The whole building has to be within the 4x4 green zone of the buff, so it is possible to buff 4 buildings with one buff if they are positioned together. If they were to allow the buff to work on half a building, then it could be possible to buff 6 buildings which is not the intended use.

[Dollt28]

I see, thanks for explanation

btw maybe add info about these buffs to archive ? They are still kind of new and I couldn't find info about that except from you on forum...

[topgearfan]

The whole building has to be within the 4x4 green zone of the buff, so it is possible to buff 4 buildings with one buff if they are positioned together. If they were to allow the buff to work on half a building, then it could be possible to buff 6 buildings which is not the intended use.

Or they could set the max number or buildings that can be buffed to 4.