In #38 Asipak explainedQuote:
Originally Posted by En_Saba_Nur
Printable View
In #38 Asipak explainedQuote:
Originally Posted by En_Saba_Nur
Not as good, but should help for now:
http://castleempiresim.com/
you also might try: http://www.settlersonlinetools.com/en/combat_simulator/Quote:
Originally Posted by SirRoy
The simulator is back online now. http://settlersonlinesimulator.com/d...fsimulator/en/
Regards
hmm neither works... ;d shame it's the best simulator out there ;}
the old version was fantastic, brillent tool, but can i ask when the fully working version will be back up?
there is still something wrong it keep asking for username and password and is very slow thats if you can conect to any version
ya I can't even connect
When the setup of the new webspace is done. It's Easter, so it'll take some more time I think.Quote:
the old version was fantastic, brillent tool, but can i ask when the fully working version will be back up?
The server of the freehoster doesn't seem to be powerful enough to come up with the load. The login form is not mine, I think it's from funpic.de to limit the traffic.Quote:
there is still something wrong it keep asking for username and password and is very slow thats if you can conect to any version
Please be patient, I'll change the hoster if it's possible.
Thanks for the good efforts Asipak.
Your excellent simulator has attracted a lot of attention, and thus we must suffer the spam-commercials nowadays.
How typical for this age; make something good, attract an audience and then we get an overdose of commercial crap :)
Now when the link is down I cannot check is it an option there to calculate 2 wave attacks? Castle empire combat sim has one, but I think it is not so accurate.
Please use http://settlersonlinesimulator.com/d...fsimulator/en/ now.
thanks.
Asipak great tool:) but new general can have 250 units;p and under 200 i cant make simulation:(
Well, you should get an advice, if you try to simulate with more than 200 units!I can't make it much larger. ;)Quote:
The number of your units is limited to 200.
Please click on the veteran icon next to the player tab to allow 250 units.
[update] Please pay attention to the new quickfilter in the Hall of Fame. It should be very easy now to filter the display.
Regards
Not working by me Code 401 "Gone"
Hello, I have just initiated a diversion to a new more powerful server. It may take some time until the diversion is effective in each. The domain stays the same!
well, for me it's much slower to process and load (image mostly) than previous server.
Is it? Which images?
The benchmark tells me, the response time is up to 10 times faster.
That all depends on location and ISP routing. A site hosted in Germany will be quicker for Europeans than it will for Brits or Aussies.
nevermind, it actually a little bit faster
I just found out it was actually your ads frame is slow (addthisxx, mthisadsxxx), but then again... my browser use abp
thus keeping my browser always is loading state
This morning i got a strange FATAL_ERROR
Am i facing the blue screen of death once more?
Fatal error: Uncaught exception 'DatabaseException' with message 'Die Datenbankabfrage konnte nicht ausgeführt werden, da sie Fehler enthält: Table './db358367/defeated_troops' is marked as crashed and should be repaired | UPDATE `defeated_troops` SET `min_loss` = IF(`min_loss` > 29, 29, `min_loss`), `max_loss` = IF(`max_loss` < 29, 29, `max_loss`), `avg_loss` = `avg_loss` + 1450, `date` = NOW() WHERE `simulation_id` = 232001 AND `unit_id` = 1928 LIMIT 1 ' in /kunden/358367_59192/webseiten/dso_kampfsimulator/includes/classes/database.class.php:48 Stack trace: #0 /kunden/358367_59192/webseiten/dso_kampfsimulator/includes/classes/managers/simulation.manager.php(335): Database->query('UPDATE? ...') #1 /kunden/358367_59192/webseiten/dso_kampfsimulator/includes/simulation.inc.php(292): Simulation_Manager->updateLosses('232001', 50, Array, in /kunden/358367_59192/webseiten/dso_kampfsimulator/includes/classes/database.class.php on line 48
So i understand that i was labeled custumor 358367_59192,
asking for the untraceable amount of opponents.
I am getting an fatal error instead of result every time I try to simulate (it worked yesterday)
edit: Looks like I am not the only one :D
Ditto.Quote:
Originally Posted by Krydolph
Yes there is something wrong with the data-base access. Hopefully Asipak can sort it out soon.
Seems to be working correctly once more.
Wonder what went wrong this morning.
Hello, a table has been crashed. I repaired it some seconds ago. Happy simulating.
where can we get SiedlerSim v1.3.12 as i like the pc stand alone.Can't reg at german forum due to..Sorry, but no new registrations are currently available. Thanks
You can find it here.Quote:
Originally Posted by Lazy_Fruitbat
I was able to login with a facebook account. Not being a German speaker I did not understand why I couldn't log in with uPlay account.
Please refer to this thread also.
I'm the one that is trying to get a companion application off the ground and I would really like to have some translators into other languages, Deutch included :)
overall the simulator is great and i thank you for your work but i have some feedback
sometimes i use lets say 29R 1S 220C and it says i will lose 29R, if i wait 20 secs and simulate the same battle again it will say lose 29R 1S 10C and the actual safe number moves to 33R (numbers were just example as i dont remember the exact battles with issues)
one issue i can confirm with bandit camp, on nords i had 54 HK in one cam and my friend wanted to do his kill for the loot. If you simulate with 2R against the 54HK it says it will kill 1 HK, which is impossible, even with 1R you have a 50-50 chance of killing 1 HK, ignoring the fact that they have 140 life.
I think the error appears because you put general attacking with 120 dmg, but from my experience general has attack animation but does no actual damage (the life line on enemy does not move when he attacks, which would be easy to see say on dogs which have low life).
The reason for that is very easy. With one click you only do 50 simulations. You can increase the number up to 2000 on clicking the button again and again. After 200 simulations, the iteration value will be set to 100.Quote:
sometimes i use lets say 29R 1S 220C and it says i will lose 29R, if i wait 20 secs and simulate the same battle again it will say lose 29R 1S 10C and the actual safe number moves to 33R (numbers were just example as i dont remember the exact battles with issues)
Because of the coincidence you have to simulate a battle more often to get a reliable result. 1000-2000 simulations are enough to simulate a unit accuracy.
Why?Quote:
one issue i can confirm with bandit camp, on nords i had 54 HK in one cam and my friend wanted to do his kill for the loot. If you simulate with 2R against the 54HK it says it will kill 1 HK, which is impossible
Recruit: 15HP damage (125HP left)
Recruit: 15HP damage (110HP left)
General: 120HP damage (-10HP -> HK is dead)
That's right (the chance is about 80% to kill a HK), but none of your units has the ability „splash damage“ so the damage won't be added to the next unit. That is why you can only kill one Huskarl with 2 recruits. Or what do you want to say?Quote:
even with 1R you have a 50-50 chance of killing 1 HK, ignoring the fact that they have 140 life.
That's just wrong!Quote:
I think the error appears because you put general attacking with 120 dmg, but from my experience general has attack animation but does no actual damage (the life line on enemy does not move when he attacks, which would be easy to see say on dogs which have low life).
Do you talk with me?Quote:
Originally Posted by BatXmaN
Yes Asipak, I was trying to get your attention in order to ask you for help with CEO Companion, but you didn't answer my PM.Quote:
Originally Posted by Asipak
I've been postponing the Battle, Trade and Production calculators because I do not want to trample on anyones past efforts.
But I've been waiting for a long time and neither you, nor Salek and neither Draxxon are answering my PM's.
I really want to have an allowed look at you guy's code, but I'm getting a bit sad by the lack of engagement :(
Hope you can change that feeling!!
Cheers mate!!
Gus
Hey Asipak,
I've answered you on the CEO forum.
Many thanks for the reply. I do appreciate the reply, since no one else has bothered to even engage :)
Cheers mate,
Gus
Hi, when I read my threads on the different forums, I don't log in, only if I have to write an answer, so I don't get to know if there is a PN immediately. ;)
Hi Asipak
Your tool is broken QQ :((( fix it plzz
When ever I enter men to attack enemies, I get this error Diese Präsenz ist leider nicht verfügbar.
I have used it a lot of times so I know its not me doing anything wrong.
Thanks in advance :) your a star
Fixed!
I don't know where the problem came from and the solution was even weird, but it works again.
Ah. Please delete your browsercache. That should help.
[edit] Ha? Wasn't there another post some seconds ago? :D
hi asipak
I've try to do simulation with roaring bull adv
but this warning appear and won't do any simulation
Diese Präsenz ist leider nicht verfügbar.
is this adv isn't available to simulate?
Thank you.
Hi, I thought I've solved that problem. Every adventure is available. Doesn't it work, after you've deleted your browser cache?
Hi Asipak
Your a Darling!
I deleted my cashe and can confirm its working, thank you very much!
Okay, thanks for your report.
I've already posted the problem on the german forum:
I don't know what's going on here! Seems to be magic!Quote:
Funny:
ajax_simulation.inc.php
ajax_test.inc.php
By the way, the files are identical.
If I rename the first one, it's working again: ajax_simulationj.inc.php
Yeah, that's fun!