Buffed buildings highlighted after being buffed

When entering a zone ( own for friend island ) and activating a buff ( basket, feast etc.... ) buildings that can be buffed are highlighted as before.

When buffing a building highlight is 'turned off' - untill buff is activated, then it is highlighted again if buff is still selected.

Result is that all buildings that can be buffed with selected buff and was not already buffed when entering zone are highlighed - both newly buffed or unbuffed.

If leaving zone and returning buffed building shows correctly.

I think it is a bug - but maybe just another unannounced feature to make buffing harder.

dtto. Vote for bug. :)

same here and also on many of my guild members

Has been the same for me since yesterday - given the daily challenges require 75 grilled steak every day, it is getting really confusing as to what is already buffed

Just to add more info - I'm seeing the same problem but also another one. I'd buffed a lot of buildings with sandwiches to tide me over before buffing with steaks to sync a lot of buildings. Came back 2 hrs later and the sandwich buffs had 2 mins to run. Watch the buffs run out then select steaks - the buildings that the buffs ran out on didn't highlight and I couldn't buff them - even if I clicked on them the buff wouldn't drop.

All other unbuffed buildings highlighted ok but not the ones the buffs had run out on. I've never had to wait any longer than the time it takes for buffs to run out before. Not sure how long I would've had to wait for before they would've highlighted properly. I waited another min or 2 then got bored and changed zone. Once I returned to my island I could buff as normal. I wonder what else BB have broken in this latest update :-(

Visited german forum - there a BB answered and said they were aware of the highlight problem.
Looks as if the problem is that buildings do not fully upgrade status while you are on island - same as when visiting someone and buildings that are building will not change completion status.

Quick workaround: switch to another buff

Most of my 'regular' buffs I do myself, and I'm seeing this too. I've found that if you know it's not buffed you can still move the cursor over it until you see it's name and then place the buff and it will kick in. So the buff can be placed but is still terribly confusing.

But this is just another in a long list of horrible performance issues that just keep increasing. Having to send explorers/geologists multiple times before they actually go, starting something building in a provision building but then the display shows nothing until you wait 10 minutes and come back and like magic it finally appeared, then if a "new quest" is on it's way in this will blow away any action you have taken and is still in the buffer so you will have to do them again.

I clear both browser and Flash cache and refresh so often now it's getting absurd.

Another graphics glitch on buffs is just par for the course now. I can't believe they aren't embarrassed by these ongoing/increasing flaws and expect yet more $ spent

"When buffing a building highlight is 'turned off' - untill buff is activated, then it is highlighted again if buff is still selected."

Apologies for ignorance but how do you 'turn it off'

Quote:

---

Originally Posted by cat_flap

"When buffing a building highlight is 'turned off' - untill buff is activated, then it is highlighted again if buff is still selected."

Apologies for ignorance but how do you 'turn it off'

---

Is 'it changes from highlighted to not highlighted' better ?

Had same problem, not sure now, did not look at, get use to it even its bit bad...

Bigger problem for me was when a buff didnt accepted. I see how a building is missed, but my buff teammate says its ok and buffed... so I go to visit someone and when I come back I see all buffed...and again I stay online, but at evening I turn PC down, tomorrow come back online again and I see how, not only that buildings, but also some new buildings didnt accept the buff. Most of the cases it is in S6 of my Island and some in S1 or Archipelago.. I have this problem maybe couple of months now, even before this one with highlighted after being buffed. I checked this several times, tryed to logoff - login, clear this and that, but as far I noticed, will be visibly only if Im offline when main server do refresh and new daily tasks occurs at 03:00h in the morning.

Seeing the same, real pain when someone asks for a whole island buff.

If you have several building buffed at same time - and want to start buff them again while some of them are still buffed there is a problem.

If you seclect irma's feast and start buffing, then the buildings who run out of buff after selecting buff will not highlight and cannot be buffed.

You have to select another buf and then feast again to be able to continue.

Merged

The issue with unfuffed building that can't be buffed still happens.